UPS reactor-深圳市港泰电子有限公司

UPS reactor

1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.
2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.
3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.

咨询我们 0755-27139706

详细介绍

1. the output voltage of the UPS inverter is converted to the required load application voltage, providing the electrical isolation between the load and the UPS.

2. products are usually combined with inductance and transformer and are combined with the capacitor of the output terminal to play the role of the LC filter to make the output voltage reach a sinusoidal waveform.

3. the short circuit impedance voltage of this type of transformer is higher than that of Ucc%.

Technical Parameters of Reactor for UPS/EPS
	Item	Standard Value	Condition
1	Inductance value	0.1mH-10mH
2	Current range	＜1000A
3	Insulation resistance	＞100MΩ	DC1000V
4	Dielectric strength	＜10mA	AC3KV 60s
5	Noise	≤65dB	1m away from transformer
6	Temperature rise	≤125K	Full load, forced air cooling
7	Insulation class	Class H (180℃)
8	Ambient temperature	0℃ - 35℃
9	Design standard	GBT10229

Application of locomotive reactor

UPS(EPS)

返回列表